internal inlay drip Irrigation tape

Short Description:

Type:Other Watering & Irrigation

Place of Origin:Tianjin, China

Brand Name:DAYU

Product ID : ID161810RN

Thickness (mm):0.16 0.18 0.2 0.3 0.4 0.6 0.8 1.0mm

Dripper Spacing (mm):100 150 200 250 300 400 500mm

Dripper Flow[0.50]rate (L/h):1.38L/h 2L/h 3L/h

Pressure :0.1Mpa

Filtration :120 mesh 120

Suitable :For use in sowing in strip crops,modern greenhouse,fruit trees,and windbreak.、、。

Package :(800-2000m/roll)

Technical Standard :GB/T19812.3-2017

Roll length : 1000/roll ,2000m/roll ,2500m/roll ,3000m/roll or customize

Raw Material : PE


Product Detail

Product Tags

Inlaid patch type drip tape

The new generation of drip irrigation products is developed from the inner cylindrical drip irrigation belt. It is an economical micro-irrigation product that meets the requirements of precision agriculture and SDI development.

Wall thickness: 0.18 0.2 0.3 0.4 0.6 0.8 1.0 1.2mm, etc.

Dripper spacing: 100 150 200 300 400 500mm, etc.

Flow rate: 0.8L/H 1L/H 1.2L/H 1.38L/H 1.8L/H 2L/H 2.4L/H 3L/H 3.2L/H

Pressure: 0.05-0.3Mpa

Filtration requirements: 120 mesh 120 mesh filtration

Scope of application: suitable for drill crops, modern greenhouses, fruit trees and windbreak forests

Advantage:

High return on investment: The best balance of drip irrigation performance and budget, without worrying about product stability and uniformity of crop growth.

Uniform flow: The pressure compensation dropper provides the correct amount of water and nutrition for each plant in long-distance pipeline transportation and high and low undulating terrain.

Good blocking resistance: The continuous self-cleaning mechanism flushes out debris and will not block during the entire crop life cycle.

The laying of branch pipes is long, and the cost is reduced: using fewer main pipes, it can irrigate branch pipes up to 500 meters long, reducing installation costs

Agricultural Drip irrigation pipe/tape systems for farm irrigation with high quality and competitive price

Features of drip irrigation pipe :

1. The round dripper is produced first by high-precision mould,then stuck to PE hose.

2. The dripper which is directly welded inside the pipe has slight pressure loss and

accurate distribution.

3. Good anti-block property, smooth flow channel and even water distribution.

4. There are two kind of drippers: pressure-compensation and nonpressure-

compensation, suitable for different terrain. ???

5. Different diameter, wall thickness and dripper spacing can be produced.

6. The most significate feature is that it can be used over 5-8 years.

It’s durable and widely used in open field irrigation.


  • Previous:
  • Next:

  • Leave Your Message

    Write your message here and send it to us
    欧美护士激情第一欧美精品